Verify results and models are in sync

You can verify that results are in sync with the current state of the model so you do not analyze incorrect or out-of-date results. You first capture the current state of the model and results and then later, you verify that the model and results are still in sync based on the registration information.

Registering and verifying results is available for the following solver environments:

• Simcenter Nastran

• Simcenter Samcef

• Simcenter 3D Thermal/Flow

• Simcenter 3D Electronic Systems Cooling

• Simcenter 3D Space Systems Thermal

• Simcenter 3D Multiphysics

You cannot register imported results. For Simcenter Samcef, you must register all the chained solutions that depend on the other solutions.

Set customer default to allow the registration and verification of results

1. Choose Menu→File→Utilities→Customer Defaults.

2. In the Customer Defaults dialog box, select Simulation→Pre/Post→General.

3. Click the Solution tab.

4. Select the Support Registration and Verification of Solution check box.

5. Click OK and restart the software.

Register the current state of model and results

When you register the results, the software records the time stamp of the results file and performs a checksum based on the current solver input file.

• In the Simulation Navigator, under the Results node, right-click a result and choose Register Result File.In Sync now appears in the Status column of the Simulation Navigator next to the registered results.

Verify that results are in sync with model

The Verification command is only available if you previously registered the results.

When changes are made to any loads, constraints, simulation objects, or to the FEM or Assembly FEM file associated with the results, the status of the results changes to In Question.

When you verify the results, the software compares the current results time stamp with the record time stamp and compares the current solver input file checksum with the recorded checksum. If both are the same, the verification is successful, and the software resets the status to In Sync. If not, it sets the status to Out of Sync.

• In the Simulation Navigator, under the Results node, right-click a result and choose Verify Result File.Messages appear about whether the results and the current state of the model are in sync.

How do I

Load and unload results

Import results through the Post Processing Navigator

Import solution results

Add companion results data

Specify the solver output file for a solution

Cache post-processing results

Learn more

Loading results

Importing results

Managing how results are imported

Associating solver output with a solution

Caching post-processing results

Quick links

Command reference

Pre/Post video examples

Bulk Entry Descriptions

Simcenter 3D tutorials

Browse Simcenter 3D help by product area

Verify results and models are in sync, Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });