Between Regions options

Primary Region
Group Reference	Lets you apply the report region to a group.For more information, see Group Reference options.
Select Object	Lets you select the primary region of the model.Element Selection Filtering lets you limit your element selection to the FE entity you select from the Filter Type list:Elements lets you select elements of any order, or any combination of elements of different orders.Element Edges lets you select only the edges of 2D elements.Element Faces lets select only the faces of 3D elements.Excluded lets you remove individual entities from within your selected object.
Stacked Smart Selector Methods	Opens the Smart Selector Methods dialog box where you can specify a progression of smart selection filters.For more information, see Smart Selector Methods dialog box.
Secondary Region
Group Reference	Lets you apply the report region to a group.For more information, see Group Reference options.
Select Object	Lets you select the secondary region of the model.Element Selection Filtering lets you limit your element selection to the FE entity you select from the Filter Type list:Elements lets you select elements of any order, or any combination of elements of different orders.Element Edges lets you select only the edges of 2D elements.Element Faces lets select only the faces of 3D elements.Excluded lets you remove individual entities from within your selected object.
Stacked Smart Selector Methods	Opens the Smart Selector Methods dialog box where you can specify a progression of smart selection filters.For more information, see Smart Selector Methods dialog box.
Primary Region Override
Override Primary Region	Overrides the primary region with a non-geometric element.Non-Geometric ElementProcesses and reports thermal data from the non-geometric element to the secondary region. Select an existing non-geometric element modeling object from the list, or click Create Modeling Object to create a non-geometric element.
Secondary Region Override
Override Secondary Region	Overrides the secondary region based on the option you select from the Override Type list.Each Override Type option processes and reports thermal data from the primary region to the selected environment or non-geometric element.If you select Non-Geometric Element, select an existing non-geometric element modeling object from the list, or click Create Modeling Object to create a new non-geometric element.
Thermal Data
Available when you are solving using the thermal solver.This data is the similar to the data obtained with the Heat Maps type Report simulation object. See Heat Maps report for more information.
Heat Flow	Processes and reports heat flowing from the Primary Region (i) to theSecondary Region (j). The temperature of the two sets of elements are reported, followed by heat flows broken down by conduction, radiation, convection and thermal couplings, as well as the total heat flow.
View Factors and RadKs	Post processes and reports view factors from the Primary Region (i) to the Secondary Region (j). Emissivity values and area for both groups are reported, as well as black body view factors, gray body view factors, ScriptF, and RadK.
3D Flow Data
Available when you are solving using the flow solver.
Pressure Drop	Reports the static and total pressure drop between the regions.
Spectral Attenuation	Reports the spectral attenuation for a transient analysis. See Spectral attenuation report for more information.
Shell Layers
Apply Primary Region Report to****Apply Secondary Region Report to	Specifies on which side of 2D shell elements you want to calculate thermal results for primary and secondary regions. The results are calculated on the following sides of 2D shell elements:Top and BottomTopBottom

How do I

Create a spectral attenuation report

Learn more

Report

Track During Solve report

Lift and Drag report

Heat Maps report

Spectral attenuation report

Per Region report

Between Regions report

Immiscible Fluid Mixture report

Look up more details

Per Element options

Per Region options

Track During Solve options

Track During Thermal Solve options

Track During Flow Solve options

Lift and Drag options

Heat Maps options

Immiscible Fluid Mixture options

Quick links

Command reference

Pre/Post video examples

Bulk Entry Descriptions

Simcenter 3D tutorials

Browse Simcenter 3D help by product area

Thermal/Flow, Electronic Systems Cooling, and Space Systems Thermal

Simcenter 3D Thermal/Flow, Electronic Systems Cooling, and Space Systems Thermal boundary conditions

Between Regions options, Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });