Solution Step dialog box (Abaqus), Dynamic Coupled Heat Transfer and Stress Setup Step page

Dynamic Coupled Thermal-Stress Step Parameters
Time Duration of Step	Specifies the total time allowed for the step.
Time Incrementation	Controls how Abaqus divides the time within a step in a quasi-static analyses.Global Time EstimateSpecifies automatic time incrementation. Abaqus automatically adjusts the size of the time increments to solve the problem efficiently.Direct User ControlSpecifies a fixed time incrementation. You directly control the time incrementation through the step.Element by ElementSpecifies a variable, automatic time incrementation using the element-by-element stable time increment estimates. Specifying element-by-element time estimator generally requires more increments and more computational time than the Global Time Estimate option. Fixed Time IncrementationSpecifies a fixed time incrementation that Abaqus determines at the beginning of the step using Element by Element option.
Maximum Time Increment	Appears when Time Incrementation is set to Global Time Estimate or Element by Element.Specifies the maximum time increment allowed. If you do not specify a value, Abaqus does not impose any upper limit on the time increment. If you specify a value of 0, the default that Abaqus uses depends on the option you select from the Application Type list.
Time Increment Size	Appears when Time Incrementation is set to Direct User Control.Specifies the amount of time for each increment.
Optional Explicit Dynamic Step Parameters
Activate Improved DT Method	Specifies the method to use to estimate the element stable time increment for 3D continuum elements and elements with plane stress formulations (shell, membrane, and two-dimensional plane stress elements). Select the Activate Improved DT Method check box to use the improved DT method. Clear the Activate Improved DT Method check box to use the conservative method.
Time Increment Scale Factor	Appears when Time Incrementation is set to Global Time Estimate, Element by Element, or Fixed Time Incrementation Specifies the factor used to scale the time increment that Abaqus computes. The default is 1.0.

Look up more details

Solution Step dialog box tabs (Abaqus)

Solution Step dialog box (Abaqus), Change Friction page

Solution Step dialog box (Abaqus), Complex Eigenvalue Extraction

Solution Step dialog box (Abaqus), Control Parameters page

Solution Step dialog box (Abaqus), Cyclic Symmetry Modes page

Solution Step dialog box (Abaqus), Cyclic Step Setup page

Solution Step dialog box (Abaqus), Data Line page

Solution Step dialog box (Abaqus), Coupled Heat Transfer and Stress Setup Step page

Solution Step dialog box (Abaqus), Explicit Dynamic Step Setup page

Solution Step dialog box (Abaqus), General page

Solution Step dialog box (Abaqus), Heat Transfer Setup page

Solution Step dialog box (Abaqus), Implicit Dynamic Step Setup page

Solution Step dialog box (Abaqus), Mass Scaling page

Solution Step dialog box (Abaqus), Other Step Options page

Solution Step dialog box (Abaqus), Other Step Parameters page

Solution Step dialog box (Abaqus), Output page

Solution Step dialog box (Abaqus), Steady-State Modal Dynamic Step Parameters page

Solution Step dialog box (Abaqus), Transient Modal Dynamic Step Setup page

Solution Step dialog box (Abaqus), User Defined Text page

Solution Step dialog box (Abaqus), Visco Step Setup page

Solution Step dialog box (Abaqus), Dynamic Coupled Heat Transfer and Stress Setup Step page, Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });