Stress Based Recovery dialog box

Name-Description
Name	Sets a unique name for the parameter.
Label	Sets a unique integer for the parameter.The dialog box automatically displays the next available label number. However, you might want to change this if you use a particular series of numbers to identify certain types of parameters.
Description	Sets a description for the parameter.This description appears in the Durability Simulation Objects dialog box only if you add the Description column to the list table. To do that, right-click the column heading row and choose Columns→Configure. In the Configure Columns dialog box, select the Description check box and then click OK.
Categorization
Category	Sets the category name for this parameter.
Sub-Category	Sets the subcategory name for this parameter.The subcategory appears in the Durability Simulation Objects dialog box only if you add the Sub-Category column to the list table.
Properties
Defines how far from the weld line the stress-based seam weld analysis evaluates the stresses. All distances are relative to the sheet thickness. For example, if the sheet is 3 mm thick, and you set the relative distance to 2, then the stresses are evaluated within 6 mm of the weld line. For more information, see Seam weld solution for solid-solid connection modeling.
Stress Recovery Definition Based on	Specifies the method to use for the stress-based fatigue calculation.WeldUses a single distance value for the whole weld.FlangeUses an individual distance value for each sheet that is welded.SectionUses an individual distance value for each section.For example, for a base sheet, both sides can have individual values.
Relative Distance for Weld	Appears when the Stress Recovery Definition Based on is set to Weld.Sets the relative distance value for the whole weld.
Relative Distance for Base Flange	Appears when the Stress Recovery Definition Based on is set to Flange.Sets the relative distance value for the base sheet.
Relative Distance for Welded Flange 1	Appears when the Stress Recovery Definition Based on is set to Flange.Sets the relative distance value for first welded sheet.
Relative Distance for Welded Flange 2	Appears when the Stress Recovery Definition Based on is set to Flange.Sets the relative distance value for second welded sheet.
Relative Distance for Section 1	Appears when the Stress Recovery Definition Based on is set to Section.Sets the relative distance value for the first section.
Relative Distance for Section 2	Appears when the Stress Recovery Definition Based on is set to Section.Sets the relative distance value for the second section.
Relative Distance for Section 3	Appears when the Stress Recovery Definition Based on is set to Section.Sets the relative distance value for the third section.
Relative Distance for Section 4	Appears when the Stress Recovery Definition Based on is set to Section.Sets the relative distance value for the fourth section.

Stress Based Recovery dialog box, Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });