MAC Contribution dialog box

Sensors
Edit in Place	Lets you change individual degrees of freedom (DOFs) for sensors in the active sensor set.CellsLets you select an individual cells to set or clear the DOFs.Selected RowsLets you select multiple rows in the table to right-click and set or clear all DOFs for the selected rows, or individual DOFs for the selected rows.
Sensor set table	Displays the status of each sensor DOF in the sensor set.Indicates the active DOF.Indicates the active DOF in the reversed direction.Indicates a disabled DOF. You can activate these DOFs when you click in one of the highlighted cells of the selected sensors.Indicates a DOF that is permanently inactive. These DOFs do not exist in the test data and you cannot turn them on.The following commands are available when you right-click in one or more selected rows when Edit in Place is set to Selected Rows:**Clear Selected DOF #**Disables selected DOF of the sensors in the selected rows. **Flip Selected DOF #**Flips selected DOF of the sensors in the selected rows. Set All DOFsActivates all DOFs of the sensors in the selected rows.Clear All DOFsDisables all DOFs of the sensors in the selected rows.
Options
Target MAC Value	Sets a modal assurance criteria (MAC) target value. Enter a value between 0 to 1.
Deactivate Sensors in Active Set	Automatically deactivates the DOFs identified in the MAC contribution computation from the active sensor set.

Quick links

Command reference

Pre/Post video examples

Bulk Entry Descriptions

Simcenter 3D tutorials

Browse Simcenter 3D help by product area

MAC Contribution

MAC Contribution dialog box, Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });