Duct Convection Correction dialog box (Thermal/Flow/SST/ESC/Multiphysics)

Properties
Correction Catalog	Opens the Correction Catalog dialog box. You can select a pre-existing duct convection correction for the heat transfer coefficient that you defined in the correction.xml file. When you select an item from the catalog, the software writes the item’s values in the Multiplier, Temperature Ratio Exponent, Temperature Difference Exponent, and Reference Temperature boxes.
Correction	Specifies the name of the correction item in the catalog. You cannot modify this name in this dialog box. You can only modify it in the XML file.
MultiplierTemperature Ratio ExponentTemperature Difference Exponent****Reference Temperature	Set the values for the multiplier, C, the temperature ratio exponent, r, the temperature difference exponent, d, and the reference temperature, Tref, that are used in the following equation that corrects the heat transfer coefficient, h0:Twall is the temperature of the convecting surface and Tfluid is the temperature of the fluid in the ducts.

Learn more

Duct Convection Correction modeling object

Quick links

Command reference

Pre/Post video examples

Bulk Entry Descriptions

Simcenter 3D tutorials

Browse Simcenter 3D help by product area

Thermal/Flow, Electronic Systems Cooling, and Space Systems Thermal

Simcenter 3D Thermal/Flow, Electronic Systems Cooling, and Space Systems Thermal boundary conditions

Duct Convection Correction dialog box (Thermal/Flow/SST/ESC/Multiphysics), Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });