Per Region report

Use the Per Region report type to generate a report on thermal solution data or 3D flow data for a specified region of your model. The software reports the data for each solution time step.

Thermal solution data

You can generate the following tables. In the Report dialog box, select the check box for the data you want.

• The Temperature table lists the average, maximum, minimum temperatures, the difference between the maximum and minimum temperatures, and the temperature upper and lower limits.

• The Heat Load table lists the total loads, the heat loads broken down in terms of planet plus radiation sources, albedo plus radiation sources, Sun, and other loads, and the percentage of the total heat load on the model.

• The Heat Flux table lists the total flux and the heat fluxes broken down in terms of planet plus radiation sources, albedo plus radiation sources, Sun, and other fluxes.

• The Properties table lists the total area, volume, mass and capacitance, and the average density, thickness of shell elements, emissivity, absorptivity, conductivity, and specific heat.

• The Orbital and Source View Factors table lists the planet, Sun and albedo view factors.

• The Phase Change table lists the average, maximum, and minimum qualities.

• The Duct Flow table lists the average velocity, average Reynolds, average mass flow, average pressure, maximum pressure, and minimum pressure.

In all tables, Time indicates the time step of a transient run. For a steady state solution, this column is equal to zero.

Example:

This example shows a partial report for a solution that includes a Per Region type Report simulation object named ReportPerRegion. The tables display the data for only the first two time steps.

Temperature

Group	Time	Avg Temp	Max Temp	Min Temp	Tmax-Tmin	Temp Upper Limit	Temp Lower Limit
ReportPerRegion	0.00E+00	1.29E+01	1.00E+03	-2E+01	1.02E+03	1.00E+36	-1.00E+36
ReportPerRegion	1.62E+02	2.15E+02	1.00E+03	-1.33E+01	1.01E+03	1.00E+36	-1.00E+36

Heat Load

Group	Time	Planet + Rad Sources	Albedo + Rad Sources	Sun	Other Loads	Total	Percent of Total
ReportPerRegion	0.00E+00	0.00E+00	2.11E+08	1.99E+07	1.01E+07	2.41E+08	2.18E+00
ReportPerRegion	1.62E+02	0.00E+00	2.11E+08	1.99E+07	1.01E+07	2.41E+08	2.18E+00

Properties

Group	Time	Total Area	Total Volume	Average Thickness	Average Emissivity	Average Absorptivity	Average Thermal Conductivity	Average Specific Heat	Total Capacitance	Average Density	Total Mass
ReportPerRegion	0.00E+00	3.10E+05	1.00E+05	3.23E-01	9.78E-01	9.78E-01	4.46E-01	6.21E+07	0.00E+00	1.72E-07	0.00E+00
ReportPerRegion	1.62E+02	3.10E+05	1.00E+05	3.23E-01	9.78E-01	9.78E-01	9.74E+03	6.21E+07	2.57E+08	1.72E-07	2.67E-01

3D flow data

You can generate the following tables. In the Report dialog box, select the check box for the data you want.

• The Velocity and Pressure table lists nodal average, maximum, and minimum velocity and pressure values.

• The Gamma table lists indexes that measure the flow uniformity through flow boundary condition faces. A velocity gamma value of unity indicates that the flow is totally uniform.

• The Fluid Temperature table lists the average, maximum, and minimum values for the fluid temperature.

• The Turbulent table lists the average, maximum, and minimum values for the turbulent kinetic energy, TKE, and its dissipation rate, Epsilon.

• The Mass and Volume Flow table lists the mass and volume flow through each flow boundary condition face.

• The Heat Flow to Fluid table lists the amount of heat that is transferred between the thermal model elements and the 3D fluid elements for the walls in the specified regions.

In all tables, Time indicates the time step of a transient run. For a steady state solution, this column is equal to zero.

Example:

This example shows a report for a steady state solution that includes two Per Region type Report simulation objects named Inlet Report and Outlet Report.

Velocity and Pressure

Group	Time	Average Velocity	Maximum Velocity	Minimum Velocity	Average Pressure	Maximum Pressure	Minimum Pressure
Inlet Report	0.00E+00	5.00E+00	5.00E+00	5.00E+00	3.75E+00	1.10E+00	1.45E-02
Outlet Report	0.00E+00	3.35E+00	5.12E+00	6.91E-02	-2.02E-03	0.00E+00	-5.02E-02

Gamma

Group	Time	Velocity Gamma
Inlet Report	0.00E+00	9.91E-01
Outlet Report	0.00E+00	8.09E-01

Fluid Temperature

Group	Time	Average Fluid Temperature	Maximum Fluid Temperature	Minimum Fluid Temperature
Inlet Report	0.00E+00	2.00E+01	2.00E+01	2.00E+01
Outlet Report	0.00E+00	2.09E+01	2.23E+01	2.00E+01

How do I

Create a spectral attenuation report

Learn more

Heat Maps report

Lift and Drag report

Track During Solve report

Between Regions report

Immiscible Fluid Mixture report

Spectral attenuation report

Inputs to expressions

Look up more details

Auto-generated expressions

Quick links

Simcenter 3D Thermal/Flow, Electronic Systems Cooling, and Space Systems Thermal boundary conditions

Thermal/Flow, Electronic Systems Cooling, and Space Systems Thermal

Command reference

Pre/Post video examples

Bulk Entry Descriptions

Simcenter 3D tutorials

Browse Simcenter 3D help by product area

Per Region report, Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });