Post-Processing

1. Specify the solution and forces for the nodal force report. — Post-processing > Calculating nodal force results > Set up and generate nodal force reports
2. Define the content for the nodal force report. — Post-processing > Calculating nodal force results > Set up and generate nodal force reports
3. Define the force calculations. — Post-processing > Calculating nodal force results > Set up and generate nodal force reports
4. Generate nodal force report output. — Post-processing > Calculating nodal force results > Set up and generate nodal force reports
Add companion results data — Post-processing > Loading and importing results
Advanced filtering exported groups for post-processing (Simcenter Samcef) — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Importing Samcef solver results
Advanced results filtering for post-processing (Simcenter Samcef) — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Importing Samcef solver results
Align axes of post-processing scenarios — Post-processing > Post processing with preconfigured views > Working with post-processing scenarios
Aligning axes of post-processing scenarios — Post-processing > Post processing with preconfigured views > Working with post-processing scenarios
Animate mode shapes — Post-processing > Displaying results in post views > Animations
Animate post-processing scenarios — Post-processing > Post processing with preconfigured views > Working with post-processing scenarios
Animate results — Post-processing > Displaying results in post views > Animations
Animate streamlines — Post-processing > Displaying results in post views > Animations
Animate time steps or iterations — Post-processing > Displaying results in post views > Animations
Animate wave results — Post-processing > Displaying results in post views > Animations
Animating post views — Post-processing > Displaying results in post views > Animations
Animation memory management and performance options — Post-processing > Post processing large models
Annotate nodes or elements by minimum or maximum results — Post-processing > Displaying results in post views > Annotations
Annotate selected nodes or elements — Post-processing > Displaying results in post views > Annotations
Annotate the model at a specified screen location — Post-processing > Displaying results in post views > Annotations
Annotating post views — Post-processing > Displaying results in post views > Annotations
Apply and save layout state files — Post-processing > Saving and restoring the state of views
Apply layout states — Post-processing > Saving and restoring the state of views
Apply nodal or elemental averaging — Post-processing > Displaying results in post views > Editing results in post views
Applying a query curve — Post-processing > Using query curves to define paths
Applying results in a model with superelements (Simcenter Samcef) — Post-processing > Post processing models with superelements
Approaches to generating envelopes — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Envelope
Associate a result measure with a design requirement — Post-processing > Exporting post views and results > Exporting result quantities as named expressions
Associating solver output with a solution — Post-processing > Loading and importing results
Averaging options for elemental and grid point results — Post-processing > Post processing element and nodal results
Averaging scenario — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Axisymmetric 3D displays — Post-processing > Displaying results in post views > Displaying symmetric results
Axisymmetric strain and stress tensors in Simcenter 3D versus Samcef Post Processing — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Structural results
Beam post-processing — Post-processing > Post processing beams
Beam resultants — Post-processing > Understanding results in post-processing
Beam stresses — Post-processing > Post processing beams
BEM post-processing scenarios parameters — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Cache post-processing results — Post-processing > Loading and importing results
Caching post-processing results — Post-processing > Loading and importing results
Calculate and display maximum alternating stress — Post-processing > Generating custom results using result probes > Examples of result probes
Calculate beam stresses from element forces and geometry — Post-processing > Post processing beams
Change and synchronize report templates — Post-processing > Report writing > Creating reports from report templates
Color displays in post views — Post-processing > Displaying results in post views
Combination — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Combination
Combine loadcases and groups of elements — Post-processing > Generating custom results using result probes > Examples of result probes
Combine nodal and elemental results in post views — Post-processing > Displaying results in post views > Editing results in post views
Combined load cases — Post-processing > Combining load cases
Combining and manipulating results — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results
Complex plot options — Post-processing > Graphing results
Complex results options — Post-processing > Understanding results in post-processing
Configure the template file XML editor — Post-processing > Displaying results in post views > Post view templates
Connect viewports to synchronize probes and variables — Post-processing > Post processing with preconfigured views > Working with post-processing scenarios
Connecting viewports — Post-processing > Post processing with preconfigured views > Working with post-processing scenarios
Contour plots — Post-processing > Displaying results in post views > Setting up contour plots in post views
Contour Plots scenario — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Control the display of assembly FEMs in post views — Post-processing > Displaying results in post views > Controlling display in post views
Control the display of deformation — Post-processing > Displaying results in post views > Displaying deformations
Control the display of deformation for models with 2D shell elements — Post-processing > Displaying results in post views > Displaying deformations
Control the display of meshes in post views — Post-processing > Displaying results in post views > Controlling display in post views
Control the visibility of elements and nodes — Post-processing > Displaying results in post views > Controlling display in post views
Controlling the visibility of results — Post-processing > Displaying results in post views > Controlling display in post views
Controlling the visibility of Simcenter Samcef results — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Importing Samcef solver results
Coordinate systems in post-processing — Post-processing > Coordinate systems in post-processing
Copy result probes — Post-processing > Generating custom results using result probes
Copy, paste, and plot viewports in a layout states — Post-processing > Saving and restoring the state of views
Copying and pasting viewports in layout states — Post-processing > Saving and restoring the state of views
Create a combined load case — Post-processing > Combining load cases
Create a hotspot recipe for a range of values — Post-processing > Finding critical areas using hotspots
Create a hotspot recipe for a threshold — Post-processing > Finding critical areas using hotspots
Create a hotspot recipe for minimum or maximum results — Post-processing > Finding critical areas using hotspots
Create a post view — Post-processing > Displaying results in post views
Create a report command — Post-processing > Report writing > Managing report commands for administrators
Create a report template — Post-processing > Report writing > Creating report templates
Create a result variable to use in a result probe — Post-processing > Generating custom results using result probes
Create a scatter plot — Post-processing > Graphing results
Create a seed set and generate streamlines — Post-processing > Displaying results in post views > Setting up contour plots in post views > Streamlines
Create a two function plot — Post-processing > Graphing results
Create an empty post view — Post-processing > Post processing large models
Create an orbit plot — Post-processing > Graphing results
Create and edit post-processing scenarios — Post-processing > Post processing with preconfigured views > Working with post-processing scenarios
Create and manage post view templates — Post-processing > Displaying results in post views > Post view templates
Create and publish reports — Post-processing > Report writing > Creating reports from report templates
Create and save layout states — Post-processing > Saving and restoring the state of views
Create and update a result measure — Post-processing > Exporting post views and results > Exporting result quantities as named expressions
Create data sources from data in the Simulation Navigator — Post-processing > Post processing with preconfigured views > Working with data sources
Create data sources from external files — Post-processing > Post processing with preconfigured views > Working with data sources
Create post-processing expressions — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Reduction and Multiple Reductions
Create query curves using post-processing data — Post-processing > Using query curves to define paths
Create query curves using pre-processing entities — Post-processing > Using query curves to define paths
Creating and editing post-processing scenarios — Post-processing > Post processing with preconfigured views > Working with post-processing scenarios
Creating query curves — Post-processing > Using query curves to define paths
Custom post view templates — Post-processing > Displaying results in post views > Post view templates
Customize the post view color bar — Post-processing > Displaying results in post views > Managing legends and color bars in post views > Customizing legends
Customize the post view legend header — Post-processing > Displaying results in post views > Managing legends and color bars in post views > Customizing legends
Customizing the post view legend — Post-processing > Displaying results in post views > Managing legends and color bars in post views > Customizing legends
Customizing universal dataset 2414 — Post-processing > Understanding results in post-processing > Universal files in post-processing
Cutting plane displays — Post-processing > Displaying results in post views > Cutting plane displays
Cyclic symmetric displays — Post-processing > Displaying results in post views > Displaying symmetric results
Cyclic worst principal stress and strain results — Post-processing > Understanding results in post-processing
Data references in the Edit and Apply Layout State dialog box — Post-processing > Saving and restoring the state of views > Edditing layout state data references
Data references in the LSX file — Post-processing > Saving and restoring the state of views > Edditing layout state data references
Data sources supported for post-processing scenarios — Post-processing > Post processing with preconfigured views > Working with data sources
Deformed model displays — Post-processing > Displaying results in post views > Displaying deformations
Delete result probes — Post-processing > Generating custom results using result probes
Deploying user-defined post-processing scenarios — Post-processing > Post processing with preconfigured views > Creating user-defined post-processing scenarios
Determining signal processing attributes — Post-processing > Post processing with preconfigured views > Working with data sources
Directivity Analysis scenario (Simcenter Nastran FEM acoustics and Acoustics BEM) — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Disabling rendering of backface polygons — Post-processing > Post processing large models
Display a temperature load — Post-processing > Generating custom results using result probes > Examples of result probes
Display free-body results — Post-processing > Calculating nodal force results > Displaying free-body results
Display post view legends — Post-processing > Displaying results in post views > Managing legends and color bars in post views
Display reduced results in a post view — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Reduction and Multiple Reductions
Display results using a result probe — Post-processing > Generating custom results using result probes
Displaying free-body results — Post-processing > Calculating nodal force results > Displaying free-body results
Displaying post-processing results with CAD geometry or pre-processing data — Post-processing > Displaying results in post views > Controlling display in post views
Displaying results on beam sections — Post-processing > Post processing beams
Displaying symmetric results — Post-processing > Displaying results in post views > Displaying symmetric results
Duct Modes Transmission Coefficients scenario — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Edit a graph — Post-processing > Graphing results
Edit a query curve — Post-processing > Using query curves to define paths
Edit and manage annotations — Post-processing > Displaying results in post views > Annotations
Edit and manage post-processing expressions — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Reduction and Multiple Reductions
Edit layout state data references — Post-processing > Saving and restoring the state of views > Edditing layout state data references
Edit post view legends — Post-processing > Displaying results in post views > Managing legends and color bars in post views
Edit the labels of color bars created from post-processing scenarios — Post-processing > Post processing with preconfigured views > Editing graphs created from post-processing scenarios
Edit the results in a post view — Post-processing > Displaying results in post views > Editing results in post views
Editing graphs created from post-processing scenarios — Post-processing > Post processing with preconfigured views > Editing graphs created from post-processing scenarios
Element error results from adaptive analysis — Post-processing > Understanding results in post-processing
Energy Contributions scenario (Simcenter Nastran FEM) — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Envelope — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Envelope
Equivalent Radiated Power scenario — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Evaluate and display upper and lower limits of worst principal stress — Post-processing > Generating custom results using result probes > Examples of result probes
Example of creating a solution for a breakout model using a nodal force report — Post-processing > Calculating nodal force results
Example of creating SMT diagrams — Post-processing > Graphing internal forces, moments, and torque
Example: Displacements on a cylinder under torsion — Post-processing > Coordinate systems in post-processing
Export a post view or animation — Post-processing > Exporting post views and results
Export a results envelope to a UNV file — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Envelope
Export combined results to a UNV file — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Combination
Export multiple reduced results to a UNV file — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Reduction and Multiple Reductions
Export reduced results to a UNV file — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Reduction and Multiple Reductions
Export report commands from a library — Post-processing > Report writing > Managing report commands for administrators
Export results data as a JT file — Post-processing > Exporting post views and results
Export results to a CSV file — Post-processing > Combining, manipulating, and extracting results > Extracting results
Exporting post views — Post-processing > Exporting post views and results
Exporting result quantities as named expressions — Post-processing > Exporting post views and results > Exporting result quantities as named expressions
Exporting results data as a JT file — Post-processing > Exporting post views and results
Extract L-curve regularization values — Post-processing > Post processing with preconfigured views > Acoustic scenario examples
Extraction — Post-processing > Combining, manipulating, and extracting results > Extracting results
Filter and sort the objects in the Post Processing Navigator — Post-processing > Post-processing fundamentals
Filtering and sorting the objects in the Post Processing Navigator — Post-processing > Post-processing fundamentals
Force Transmissibility scenario (Simcenter Nastran FEM acoustics) — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Fourier axisymmetric 2D displays — Post-processing > Displaying results in post views > Displaying symmetric results
Frequency interpolation methods — Post-processing > Generating custom results using result probes
Function Plots scenario — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Generate a manual of report command descriptions — Post-processing > Report writing > Managing report commands for administrators
Generate a solution from a nodal force report — Post-processing > Calculating nodal force results
Generate hotspots from hotspot recipes — Post-processing > Finding critical areas using hotspots
Generating nodal force report output — Post-processing > Calculating nodal force results
Generating result probe output — Post-processing > Generating custom results using result probes
Get help or find more example commands — Post-processing > Report writing > Managing report commands for administrators
Graph a single result across FE entities — Post-processing > Graphing results
Graph multiple reduced results — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Reduction and Multiple Reductions
Graph nodal force reports across multiple iterations — Post-processing > Calculating nodal force results
Graph results across multiple iterations — Post-processing > Graphing results
Graphing a single result across nodes or elements — Post-processing > Graphing results
Graphing results across multiple iterations — Post-processing > Graphing results
Graphs — Post-processing > Graphing results
Grid Contribution scenario (Simcenter Nastran and MSC Nastran ) — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Grid point force and moment results — Post-processing > Understanding results in post-processing
Hotspots — Post-processing > Finding critical areas using hotspots
Identify nodes or elements by minimum and maximum results — Post-processing > Identifying results for specified objects
Identify nodes or elements within a range of results values — Post-processing > Identifying results for specified objects
Identify results by group or selection recipe — Post-processing > Identifying results for specified objects
Identify results for selected nodes or elements — Post-processing > Identifying results for specified objects
Identify results for specified node or element IDs — Post-processing > Identifying results for specified objects
Identifying results — Post-processing > Identifying results for specified objects
Identifying results contribution for envelope displays — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Envelope
Identifying results in the presence of superelements — Post-processing > Post processing models with superelements
Identifying results in the presence of superelements — Post-processing > Identifying results for specified objects
Import and export session files — Post-processing > Saving and restoring the state of views
Import report commands to a library — Post-processing > Report writing > Managing report commands for administrators
Import results through the Post Processing Navigator — Post-processing > Loading and importing results
Import solution results — Post-processing > Loading and importing results
Importing and exporting session files — Post-processing > Saving and restoring the state of views
Importing results — Post-processing > Loading and importing results
Importing results on mixed-order elements (Simcenter Samcef) — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Structural results
Importing Simcenter Samcef XY results graphs — Post-processing > Understanding results in post-processing > Samcef results in post-processing > XY results graphs
Inconsistencies between post-processing and solver results — Post-processing > Understanding results in post-processing
Interpreting universal dataset 2414 — Post-processing > Understanding results in post-processing > Universal files in post-processing
Inverse Numerical Acoustics (L-Curve) scenario — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Laminate results (Simcenter Samcef) — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Structural results
Languages supported for writing NX Open report programs — Post-processing > Report writing > Managing report commands for administrators
Large model post-processing — Post-processing > Post processing large models
Layout state data references — Post-processing > Saving and restoring the state of views > Edditing layout state data references
Layouts and viewports — Post-processing > Setting the layout for results
Load and display superelement results — Post-processing > Post processing models with superelements
Load and unload results — Post-processing > Loading and importing results
Load Identification scenario (Simcenter Nastran FEM) — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Loading results — Post-processing > Loading and importing results
Loading superelements in post processing (Simcenter Samcef) — Post-processing > Post processing models with superelements
Manage data sources — Post-processing > Post processing with preconfigured views > Working with data sources
Manage graphs — Post-processing > Graphing results
Manage hotspot recipes — Post-processing > Finding critical areas using hotspots
Manage layout states — Post-processing > Saving and restoring the state of views
Manage post view legends — Post-processing > Displaying results in post views > Managing legends and color bars in post views
Manage report images — Post-processing > Report writing > Creating reports from report templates
Managing how results are imported — Post-processing > Loading and importing results
Managing post view legends — Post-processing > Displaying results in post views > Managing legends and color bars in post views
Managing superelement representations (Simcenter Samcef) — Post-processing > Post processing models with superelements
Manually import XY time history graphs from an AFU file (Simcenter Samcef) — Post-processing > Understanding results in post-processing > Samcef results in post-processing > XY results graphs
Mapping solution results (Simcenter Samcef) — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Structural results
Marker plots — Post-processing > Displaying results in post views > Setting up contour plots in post views
Matrix Comparison Plots scenario (Simcenter 3D NVH) — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Maximum Analysis Frequency scenario (Acoustics BEM) — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Measure distance between nodes — Post-processing > Displaying results in post views
Modify combined load cases in a dialog box — Post-processing > Combining load cases
Modify combined load cases in a spreadsheet or text editor — Post-processing > Combining load cases
Motion Results scenario (Simcenter 3D Motion) — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Move annotations — Post-processing > Displaying results in post views > Annotations
Nodal combination options for element-nodal results — Post-processing > Post processing element and nodal results
Nodal force reports — Post-processing > Calculating nodal force results
Octave bands — Post-processing > Generating custom results using result probes
Options for element-nodal results — Post-processing > Post processing element and nodal results
Options for elemental results — Post-processing > Post processing element and nodal results
Orbit plots — Post-processing > Graphing results
Output a result probe to a table field — Post-processing > Generating custom results using result probes
Output a temperature field — Post-processing > Generating custom results using result probes > Examples of result probes
Overlay post views — Post-processing > Displaying results in post views
Overlay scenarios — Post-processing > Post processing with preconfigured views > Working with post-processing scenarios
Overlaying post-processing scenarios — Post-processing > Post processing with preconfigured views > Working with post-processing scenarios
Peakout Frequencies Plots scenario — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Per-face results in Simcenter Samcef — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Structural results
Perform frequency packing — Post-processing > Generating custom results using result probes > Examples of result probes
Perform stress linearization — Post-processing > Stress linearization
Plot order-cut curves — Post-processing > Post processing with preconfigured views > Acoustic scenario examples
Plot XY results graphs (Simcenter Samcef) — Post-processing > Understanding results in post-processing > Samcef results in post-processing > XY results graphs
Plotting contribution from panels, structural modes, fluid modes, and MATVs — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Plotting results in a model with superelements (Nastran) — Post-processing > Post processing models with superelements
Plotting results in a model with superelements (Simcenter Samcef) — Post-processing > Post processing models with superelements
Plotting superelements in multiple load case results (Simcenter Samcef) — Post-processing > Post processing models with superelements
Point Mobility scenario (Simcenter 3D NVH) — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Post view preferences — Post-processing > Displaying results in post views
Post view template XML files — Post-processing > Displaying results in post views > Post view templates
Post view templates — Post-processing > Displaying results in post views > Post view templates
Post views — Post-processing > Displaying results in post views
Post-processing — Post-processing > Post-processing fundamentals
Post-processing an unsupported Simcenter Samcef analysis — Post-processing > Understanding results in post-processing > Samcef results in post-processing
Post-processing environments — Post-processing > Post-processing fundamentals
Post-processing scenarios in Simcenter Samcef — Post-processing > Post processing with preconfigured views > Samcef scenario-based post-processing
Pre-defined information for legend headers — Post-processing > Displaying results in post views > Managing legends and color bars in post views > Customizing legends
Processing results for acoustic analysis — Post-processing > Generating custom results using result probes
Quality Metrics scenario — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Query curve workflow — Post-processing > Using query curves to define paths
Query curves — Post-processing > Using query curves to define paths
Random Results scenario (Simcenter Nastran FEM acoustics and Simcenter 3D Acoustics BEM) — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Random VATV Forced Response Plots scenario — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Ray Path Analysis scenario — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Reduction and Multiple Reduction — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Reduction and Multiple Reductions
Reference deformation when displaying modal results in Simcenter Samcef — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Structural results
Refresh the viewports of a layout state — Post-processing > Saving and restoring the state of views
Reload XY time history graphs from an AFU file (Simcenter Samcef) — Post-processing > Understanding results in post-processing > Samcef results in post-processing > XY results graphs
Reorder items in a report — Post-processing > Report writing > Creating reports from report templates
Report command libraries — Post-processing > Report writing > Managing report commands for administrators
Report commands — Post-processing > Report writing > Managing report commands for administrators
Report creation workflow — Post-processing > Report writing
Report template creation workflow — Post-processing > Report writing
Report templates — Post-processing > Report writing > Creating report templates
Report writing — Post-processing > Report writing
Resize viewports — Post-processing > Setting the layout for results
Restore or delete undisplayed contour plots — Post-processing > Displaying results in post views
Result probes — Post-processing > Generating custom results using result probes
Result types and results — Post-processing > Understanding results in post-processing
Result variables — Post-processing > Generating custom results using result probes
Results and filtering criteria for post-processing scenarios in Simcenter Samcef — Post-processing > Post processing with preconfigured views > Samcef scenario-based post-processing
Results codes support (Simcenter Samcef Structure and Thermal) — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Structural results
Results for combined load cases — Post-processing > Combining load cases
Results in the Post Processing Navigator (Simcenter Samcef) — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Importing Samcef solver results
Samcef SAMPAD import tool and log file (Simcenter Samcef) — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Importing Samcef solver results
Samcef solver results files (Simcenter Samcef) — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Importing Samcef solver results
Save a results envelope to a field — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Envelope
Save combined results to a field — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Combination
Save identified results to a group — Post-processing > Identifying results for specified objects
Save identified results to a table field — Post-processing > Identifying results for specified objects
Save nodal force report results to a table field — Post-processing > Calculating nodal force results
Save reduced results to a field — Post-processing > Combining, manipulating, and extracting results > Combining and manipulating results > Reduction and Multiple Reductions
Scatter plots — Post-processing > Graphing results
Scenario-based post-processing — Post-processing > Post processing with preconfigured views
Search for report commands — Post-processing > Report writing > Managing report commands for administrators
Search methods for finding hotspots — Post-processing > Finding critical areas using hotspots
Select ply locations — Post-processing > Understanding results in post-processing
Select shell locations — Post-processing > Understanding results in post-processing
Set displacements relative to a node — Post-processing > Displaying results in post views > Editing results in post views
Set preferences for post view legends — Post-processing > Displaying results in post views > Managing legends and color bars in post views
Set report writing preferences — Post-processing > Report writing > Creating reports from report templates
Set the color display of a post view — Post-processing > Displaying results in post views
Set the display of edges in post views — Post-processing > Displaying results in post views > Controlling display in post views
Set the display of faces in a post view to a single color — Post-processing > Displaying results in post views > Controlling display in post views
Set the display of material, property, and mesh-based post view — Post-processing > Displaying results in post views
Set the post-processing environment — Post-processing > Post-processing fundamentals
Set up a contour plot — Post-processing > Displaying results in post views > Setting up contour plots in post views
Set up a cross-section view — Post-processing > Post processing beams
Set up a cutting plane display — Post-processing > Displaying results in post views > Cutting plane displays
Set up a cyclic symmetric display — Post-processing > Displaying results in post views > Displaying symmetric results
Set up a Fourier axisymmetric 2D display — Post-processing > Displaying results in post views > Displaying symmetric results
Set up a marker plot — Post-processing > Displaying results in post views > Setting up contour plots in post views
Set up a streamlines display — Post-processing > Displaying results in post views > Setting up contour plots in post views > Streamlines
Set up an axisymmetric 3D display — Post-processing > Displaying results in post views > Displaying symmetric results
Set up and generate nodal force reports — Post-processing > Calculating nodal force results
Set up and generate nodal force reports on path — Post-processing > Graphing internal forces, moments, and torque
Set up the display of a contour plot post view — Post-processing > Displaying results in post views
Set up the environment for report writing — Post-processing > Report writing
Shear, moment, and torque diagrams — Post-processing > Graphing internal forces, moments, and torque
Shell locations — Post-processing > Understanding results in post-processing
Shell resultants — Post-processing > Understanding results in post-processing
Simcenter Samcef Benchmark scenario — Post-processing > Post processing with preconfigured views > Samcef scenario-based post-processing
Simcenter Samcef Function Plots scenario — Post-processing > Post processing with preconfigured views > Samcef scenario-based post-processing
Specialist Durability Function Definition scenario — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Specialist Durability Plots scenario — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Specify a stress recovery point — Post-processing > Post processing beams
Specify the output and plot SMT diagrams — Post-processing > Graphing internal forces, moments, and torque
Specify the solver output file for a solution — Post-processing > Loading and importing results
Specify viewports for displays — Post-processing > Setting the layout for results
Specifying default options when importing Simcenter Samcef results — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Importing Samcef solver results
Specifying units when importing Samcef results (Simcenter Samcef) — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Importing Samcef solver results
Stepping through a series of results — Post-processing > Displaying results in post views
Stiffness CSV format for direct load identification — Post-processing > Post processing with preconfigured views > Working with data sources
Strain tensor components in post-processing (Simcenter Samcef) — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Structural results
Streamlines — Post-processing > Displaying results in post views > Setting up contour plots in post views > Streamlines
Stress classification lines — Post-processing > Stress linearization
Stress linearization — Post-processing > Stress linearization
Stress linearization formulas for 3D models — Post-processing > Stress linearization
Stress linearization formulas for axisymmetric models — Post-processing > Stress linearization
Switch between the model view and contour plots — Post-processing > Displaying results in post views
Synchronization of data sources — Post-processing > Post processing with preconfigured views > Working with data sources
Synchronize viewports — Post-processing > Setting the layout for results
System templates — Post-processing > Displaying results in post views > Post view templates
Transfer Path Analysis (TPA) scenario (Simcenter Nastran FEM acoustics) — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Transform deformations with respect to a node location — Post-processing > Displaying results in post views > Displaying deformations
Transform deformations with respect to a reference deformation — Post-processing > Displaying results in post views > Displaying deformations
Transform results in a model coordinate system displayed in the graphics window — Post-processing > Coordinate systems in post-processing
Transform results in a model coordinate system listed in the Simulation Navigator — Post-processing > Coordinate systems in post-processing
Transform results in a selected solver output coordinate system — Post-processing > Coordinate systems in post-processing
Transmission Loss scenario (Simcenter Nastran FEM acoustics and Acoustics BEM) — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Trim Analysis Results scenario (SOL 144) — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Troubleshooting import of Simcenter Samcef results — Post-processing > Understanding results in post-processing > Samcef results in post-processing > Importing Samcef solver results
Turn off and on the cutting plane display — Post-processing > Displaying results in post views > Cutting plane displays
Two function plots — Post-processing > Graphing results
Types of contour plots in post views — Post-processing > Displaying results in post views > Setting up contour plots in post views
Undisplayed contour plots — Post-processing > Displaying results in post views
Update a cutting plane display in real time — Post-processing > Displaying results in post views > Cutting plane displays
Use a query curve — Post-processing > Using query curves to define paths
User-defined post-processing scenario examples — Post-processing > Post processing with preconfigured views > Creating user-defined post-processing scenarios
User-defined post-processing scenarios — Post-processing > Post processing with preconfigured views > Creating user-defined post-processing scenarios
User-defined post-processing scenarios programmer's guide — Post-processing > Post processing with preconfigured views > Creating user-defined post-processing scenarios
Using binary universal files in post-processing — Post-processing > Understanding results in post-processing > Universal files in post-processing
Using element-nodal results to create elemental displays — Post-processing > Post processing element and nodal results
Using layouts to save and restore views — Post-processing > Saving and restoring the state of views
Using NX Open with report commands — Post-processing > Report writing > Managing report commands for administrators
Using selection recipes with result probes — Post-processing > Generating custom results using result probes
Using the Post Processing Navigator — Post-processing > Post-processing fundamentals
Using the Scenario Based Data-Visualization Navigator — Post-processing > Post processing with preconfigured views
Using the Scenario Based Data-Visualization Navigator — Post-processing > Post-processing fundamentals
Using universal files in post-processing — Post-processing > Understanding results in post-processing > Universal files in post-processing
Vector and tensor components and invariants — Post-processing > Understanding results in post-processing
Vector and tensor results — Post-processing > Understanding results in post-processing
Verify results and models are in sync — Post-processing > Loading and importing results
View and customize identified results in HTML format — Post-processing > Identifying results for specified objects
View published reports — Post-processing > Report writing > Creating reports from report templates
Viewports in post-processing — Post-processing > Setting the layout for results
Visualize structural node contribution, Element ERP, and directivity data — Post-processing > Post processing with preconfigured views > Acoustic scenario examples
Waterfall to Order-Cut scenario (Simcenter Nastran FEM acoustics and Acoustics BEM) — Post-processing > Post processing with preconfigured views > Types of post-processing scenarios
Ways to work with results — Post-processing > Post-processing fundamentals
Working with ASCII universal files in post-processing — Post-processing > Understanding results in post-processing > Universal files in post-processing
Working with curve operation results — Post-processing > Saving and restoring the state of views
Write identified data to a spreadsheet or CSV file — Post-processing > Identifying results for specified objects