Local Analysis Results dialog box

Defines which results are created at the locations of Function Definitions in a Specialist Durability solution.

Name-Description
Name	Sets a unique name for the parameter.
Label	Sets a unique integer for the parameter.The dialog box automatically displays the next available label number. However, you might want to change this if you use a particular series of numbers to identify certain types of parameters.
Description	Sets a description for the parameter.This description appears in the Durability Simulation Objects dialog box only if you add the Description column to the list table. To do that, right-click the column heading row and choose Columns→Configure. In the Configure Columns dialog box, select the Description check box and then click OK.
Categorization
Category	Sets the category name for this parameter.
Sub-Category	Sets the subcategory name for this parameter.The sub-category appears in the Durability Simulation Objects dialog box only if you add the Sub-Category column to the list table.
Properties
Stress Results
Elastic Stress Tensor Results	Requests local elastic stress tensor results. Creates plots for the X, Y and XY components. If you choose a full 3D based parameter in the Local Stress State simulation object,.all stress tensor components are plotted.
Stress on Projection	Requests local plastic stress results in all projections that are defined in the Local Stress State simulation object. If the analysis type is a strain-life analysis, the software plots the local plastic stresses after the local plastic.
Strain Results
Elastic Strain Tensor Results	Requests local elastic strain tensor results. Creates plots for the X, Y, Z, and XY directions. If you choose a full 3D based parameter in the Local Stress State simulation object, all strain tensor components are plotted.
Strain on Projection	Requests local plastic strain results in all projections that are defined in the Local Stress State simulation object. If the analysis type is a strain-life analysis, the software plots the local plastic strains after the local plastic approximation.
Damage Results
Maximum of all Critical Planes	Requests the maximum damage result from all critical planes. Plots the accumulated damage at each point in time as well as the damage increments for each point in time.
Critical Planes	Requests damage results on all critical planes. For strain gages, the critical planes are based on the orientations of the strain gage.
Contribution Results
Stress Contribution	Requests the contribution of each load to the maximum absolute stress.The contribution is calculated by using the maximum absolute stress of all time steps. The maximum absolute stress is calculated for all loads, and calculated when removing the load under consideration from the input loads.\frac{{\mathop {\max }\limits_t \left( {\left
Damage Contribution	Requests the contribution of each load to the overall damage.The contribution is calculated by using the overall damage, and the damage resulting when removing the load under consideration from the input loads. The accumulated damage at the end will be taken for the calculation result.\frac{{{D_{all}}}}{{{D_{without}}}}
Strain Gage Results
Elastic Stress Projection	Requests results of local elastic stress projected onto the strain gage.
Elastic Strain Projection	Requests results of local elastic strain projected onto the strain gage.

Quick links

Command reference

Pre/Post video examples

Bulk Entry Descriptions

Simcenter 3D tutorials

Browse Simcenter 3D help by product area

Local Analysis Results dialog box, Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });