Sensor Set dialog box

Name
Name	Sets the sensor set name.
Listing
Available for cloned sensor sets.
Edit in Place	Indicates how you modify the selected structural or pressure sensor degrees of freedom (DOF).Cells — Lets you modify individual sensor DOF.Selected Rows — Lets you modify DOFs for the selected rows.
Sensor set table	Displays the status of each sensor DOF in the sensor set.Indicates the active DOF.Indicates the active structural DOF in the reverse direction.Indicates a disabled DOF. You can activate these DOFs when you click in one of the highlighted cells of the selected sensors.Indicates that the DOF is permanently inactive. These DOFs do not exist in the test data and you cannot turn them on.The following commands are available when you right-click in one or more selected rows when Edit in Place is set to Selected Rows:**Clear Selected DOF #**Disables the selected DOF in the selected rows. **Flip Selected DOF #**Flips selected structural DOF of the sensors in the selected rows. Set All DOFsActivates all DOFs of the sensors in the selected rows.Clear All DOFsDisables all DOFs of the sensors in the selected rows.Clear Selected PDisables the pressure DOF in the selected rows.

Quick links

Command reference

Pre/Post video examples

Bulk Entry Descriptions

Simcenter 3D tutorials

Browse Simcenter 3D help by product area

Sensors

Manage sensors for cloned test sensor sets

Sensor Set dialog box, Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });