SimcenterKnowledge

Command reference help topics > Specialist Durability simulation object dialog boxes

Damage Sum Limit dialog box

Name-Description
Name Sets a unique name for the parameter.
Label Sets a unique integer for the parameter.The dialog box automatically displays the next available label number. However, you might want to change this if you use a particular series of numbers to identify certain types of parameters.
Description Sets a description for the parameter.This description appears in the Durability Simulation Objects dialog box only if you add the Description column to the list table. To do that, right-click the column heading row and choose Columns→Configure. In the Configure Columns dialog box, select the Description check box and then click OK.
Categorization
Category Sets the category name for this parameter.
Sub-Category Sets the subcategory name for this parameter.The subcategory appears in the Durability Simulation Objects dialog box only if you add the Sub-Category column to the list table.
Properties
Damage Sum Sets a limit for the damage value.Failure is assumed if the Miner damage reaches this value.This value must be greater than 0. You can set it below 1 to be conservative for variable amplitude loading.

Damage Sum Limit dialog box, Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });

Source: https://docs.sw.siemens.com/en-US/doc/289054037/PL20200601120302950.advanced/xid1608922 · retrieved 2026-07-17