Line Mesh Primitive dialog box

Mesh Name
Mesh Name	Specifies the name of the line mesh primitive.
Element Properties
Type	Specifies the type of element to create.
Edit Mesh Associated Data	Appears when you select an element type that requires the definition of additional properties.Opens the Mesh Associated Data dialog box where you can define solver-specific properties for the elements. The software applies these properties uniformly to all the elements in the mesh. For more information, see Mesh-associated data.
Primitive Parameters
CSYS	Lets you create or select a coordinate system.If you select a coordinate system, the software uses the origin of the coordinate system as the origin of the line primitive. The line is created along the X direction of the selected coordinate system.For more information, see CSYS dialog box.
Automatic Line Position and Size	If a coordinate system exists, places the coordinate system at the center of the model but does not change the orientation.If no coordinate system exists, this command creates a new one that is aligned with the absolute (global) coordinate system.This command also computes the length of the line using the location of the line mesh primitive and the size of the FE model.
Offset XOffset YOffset Z	Defines the offset value in the X, Y, Z directions to create the line relative to the local coordinate system.
Length	Defines the length of the line.
Mesh Parameters
Maximum Element Size	Specifies the maximum element size for the mesh primitive.Type a size and select the units, or click Automatic Maximum Element Size to compute the maximum element size based on the size of the box.To specify the element size as a function of frequency, click the DesignLogic list and select Function to use the SizeForAcoustics function. For more information, see Element size for acoustic analysis
Destination Collector
Automatic Creation	Creates a new mesh collector for the current mesh using the default physical properties.
Mesh Collector	Lets you select an existing collector or create a new one. Click New Collector to use the Mesh Collector dialog box to create additional mesh collectors. See Mesh collectors for more information.
Preview
Preview	Lets you preview the size, location, and appearance of the line mesh primitive elements in a dynamic view as you specify the necessary options.
Show Result	Lets you preview the mesh primitive based on your current selections.Note: For performance purposes, the software limits the number of elements that you can dynamically preview. The final mesh may be different from the mesh that you preview.

Quick links

Command reference

Pre/Post video examples

Bulk Entry Descriptions

Simcenter 3D tutorials

Browse Simcenter 3D help by product area

Line Mesh Primitive dialog box, Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });