Laminate quick report

The laminate quick report exports the results summaries to an Excel spreadsheet or a CSV file without querying the active FEM. Because the laminate quick report queries the results sets without accessing the FEM, the report is processed quickly. This command is especially useful for large and numerous solutions.

The quick report contains:

• A top summary table that lists the worst ply values for all the result sets. A top summary exists only if more than one result set are selected.

• A summary table for each result set.

The following laminate results are supported:

• Shell Stress Resultants

• Ply Stresses

• Ply Strains

• Ply/Bond Failure Indices

• Ply/Bond Strength Ratios

The ply results are outputted in the ply coordinate system.

The software produces the laminate quick report from the results sets that you specify for the laminate post report metasolution.

Use the Quick Report command to specify the laminate results and the enveloping types that you want. You can change your specified settings using the Edit command that you access from the quick report node.

For each laminate result, you must specify an enveloping type. The software reports:

• The maximum and minimum values of the specified laminate results if you select Max & Min.

• The minimum values of the specified laminate results if you select Min.

• The maximum values of the specified laminate results if you select Max.

• The maximum absolute values of the specified laminate results if you select Max Absolute.

• The minimum absolute values of the specified laminate results if you select Min Absolute.

The Max & Min option is useful to isolate the highest tensile and compressive stresses.

Where do I find it?

Application	Pre/Post
Prerequisite	You must work in the Simulation file and a laminate post report must be active.
Command Finder	Quick Report
Menu	Insert→Laminate→Advanced Post Reporting→Quick Report
Simulation Navigator	Right-click the laminate post report node→Create Quick Report

How do I

Create a laminate post report

Create a laminate spreadsheet report

Create a laminate graphical report

Create a laminate quick report

View laminate physical properties for a selected element in post processing

Learn more

Advanced post processing of laminate results

Laminate spreadsheet report

Laminate graphical report

Laminate report objects

Look up more details

Right-click commands for the laminate post report nodes

Quick links

Command reference

Pre/Post video examples

Bulk Entry Descriptions

Simcenter 3D tutorials

Browse Simcenter 3D help by product area

Laminate quick report, Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });