Load Case Filtering Solution dialog box

Name
Name	Sets the name for the load case filtering solution you are creating.
Default Method Units	Sets a consistent unit system for the load case filtering solution by specifying the units for mass, length, force, angular measurement, and temperature. All other units are deduced by the software from this initial selection.Note: Seconds are the unit of measurement for time in every selection.Use Part UnitsSets the units of the current part as the units for the load case filtering solution.**(kg)(mm)(mN)(radians)(C)Sets the software's metric units as the units for the load case filtering solution.(lbf-sec^2/in)(in)(lbf)(radians)(F)Sets the software's imperial units as the units for the load case filtering solution.(kg)(m)(N)(radians)(K)**Sets the International System of units as the units for the load case filtering solution.
Reference FE Solution
Reference FE Solution	Displays the linear or aeroelastic static solutions for which you can create a load case filtering solution.
Description
Description	Sets the description for the load case filtering solution you are creating. This description appears in the Simulation Navigator.

How do I

Create a load case filtering solution

Quick links

Command reference

Pre/Post video examples

Bulk Entry Descriptions

Simcenter 3D tutorials

Browse Simcenter 3D help by product area

Load Case Filtering Solution dialog box, Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });