Create a two-sided stream on edges

This example shows how to create a two-sided stream on edges.

Click Home tab→Loads and Conditions group→Load Type list →Thermal Stream .

Set the following:

1. Type = Two-Sided Stream on Edges

2. Name = Stream 7

3. Selection Type (Path Selection — Side A and Path Selection — Side B groups) = Polygon Edge

Select the first (1) and last (2) polygon edges to specify the stream path on side A.

In the Path Selection — Side B group, click Select Object and, in the graphics window, select the first (1) and last (2) polygon edges to specify the stream path on side B.

Make sure that the stream direction is in the same direction for sides A and B.

Set the following:

Fluid group

• Fluid Material = Air

Stream Conditions group

• Mass Flow = 0.9880 kg/sec

• Inlet Temperature = 666.42 C

• Pressure = 0.0493 N/mm^2(MPa)

Heat Transfer — Side A group

• Heat Transfer Coefficient = 150 W/m^2-C

Heat Transfer — Side B group

• Use same Heat Transfer as Side A check box =

• Heat Transfer Coefficient = 175 W/m^2-C

Click OK.

How do I

Connect thermal streams automatically

Display mass flow imbalances at duct and stream junctions

Connect thermal streams at a junction

Learn more

Thermal Stream

Inputs to expressions

Thermal Streams Junction

Displaying data summary in HTML

Look up more details

Thermal Stream dialog box

Auto-generated expressions

HTML summary data

Quick links

Simcenter 3D Thermal/Flow, Electronic Systems Cooling, and Space Systems Thermal boundary conditions

Thermal/Flow, Electronic Systems Cooling, and Space Systems Thermal

Command reference

Pre/Post video examples

Bulk Entry Descriptions

Simcenter 3D tutorials

Browse Simcenter 3D help by product area

Create a two-sided stream on edges, Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });