Laminate sine results

The following table lists the output requests that you can enable in the Laminate Sine Output Requests modeling object and the corresponding post-processing results nodes.

Output request	At Frequency and Peak	XY Functions
Accelerations	Acceleration – NodalAngular Acceleration – NodalAcceleration Magnitude – Nodal****Angular Acceleration Magnitude – Nodal	Available
Displacements	Displacement – NodalRotation – NodalDisplacement Magnitude – Nodal****Rotation Magnitude – Nodal	Available
Element Forces	Shell Resultants – ElementalShell Resultants – Elemental-NodalBeam Resultants – ElementalBeam Resultants – Elemental-NodalSpring-Dashpot Resultants – Elemental****Spring-Dashpot Resultants – Elemental-Nodal	Available
Failure Metrics	Homogeneous elements	Von Mises Stress	Von Mises Stress – Elemental****Von Mises Stress – Element-Nodal	Not available
Failure Index	Failure Index – Elemental-Nodal	Not available
Margin of Safety	Homogeneous MoS – Elemental	Not available
Composite laminates (2D)	Failure Index	Ply Failure Index – Elemental****Bond Failure Index – Elemental	Not available
Strength Ratio	Ply Strength Ratio – Elemental****Bond Strength Ratio – Elemental	Not available
Margin of Safety	Ply MoS – Elemental****Bond MoS – Elemental	Not available
Composite laminates (3D)	Failure Index	Solid Laminate Failure Index – ElementalSolid Laminate Failure Index – Elemental-NodalSolid Inter-Laminar Failure Index – Elemental****Solid Inter-Laminar Failure Index – Elemental-Nodal	Not available
Strength Ratio	Ply Strength Ratio – ElementalPly Strength Ratio – Element-NodalBond Strength Ratio – Elemental****Bond Strength Ratio – Element-Nodal	Not available
Margin of Safety	Ply MoS – Elemental****Bond MoS – Elemental	Not available
Grid Point Forces	Grid Point Reaction Force – NodalGrid Point Reaction Moment – NodalGrid Point Reaction Force – Element-NodalGrid Point Reaction Moment – Element-NodalGPF Force Magnitude – Nodal****GPF Moment Magnitude– Nodal	Not available
MPC Forces	Reaction Force MPC – NodalReaction Moment MPC – NodalMPC Force Magnitude– Nodal****MPC Moment Magnitude – Nodal	Available
SPC Forces	Reaction Force – NodalReaction Moment – NodalSPC Force Magnitude – Nodal****SPC Moment Magnitude – Nodal	Available
Strains	Homogeneous elements	Strain – ElementalStrain – Elemental-NodalAxial Strain – ElementalTorsion Strain – ElementalShell Strain Resultant – ElementalShell Strain Resultant – Elemental-NodalBeam Strain Resultant – ElementalBeam Strain Resultant – Elemental-NodalSpring-Dashpot Strain Resultant – ElementalSpring-Dashpot Strain Resultant – Elemental-NodalVon Mises Strain – ElementalVon Mises Strain – Elemental-NodalMax Shear Strain for 2D elements– ElementalMax Shear Strain for 2D elements– Elemental-NodalMin, Max Principal Strain – Elemental****Min, Max Principal Strain – Elemental-Nodal	Available
Composite laminates	Ply Strain – ElementalPly Strain – Element-NodalPly Von Mises Strain – ElementalPly Von Mises Strain – Elemental-NodalPly Max Shear Strain for 2D elements– ElementalPly Max Shear Strain for 2D elements– Elemental-NodalPly Min, Max Principal Strain – Elemental****Ply Min, Max Principal Strain – Elemental-Nodal	Not available
Stresses	Homogeneous elements	Stress – ElementalStress – Elemental-NodalAxial Stress – ElementalTorsion Stress – ElementalVon Mises Stress – Elemental****Von Mises Stress – Elemental-Nodal Max Shear Stress for 2D elements– ElementalMax Shear Stress for 2D elements– Elemental-NodalMin, Max Principal Stress – Elemental****Min, Max Principal Stress – Elemental-Nodal	Available
Composite laminates	Ply Stress – ElementalPly Stress – Element-NodalPly Von Mises Stress – ElementalPly Von Mises Stress – Elemental-NodalPly Max Shear Stress for 2D elements– ElementalPly Max Shear Stress for 2D elements– Elemental-NodalPly Min, Max Principal Stress – Elemental****Ply Min, Max Principal Stress – Elemental-Nodal	Not available
Velocities	Velocity – NodalAngular Velocity – NodalVelocity Magnitude – Nodal****Angular Velocity Magnitude – Nodal	Available

Note:

The elemental-nodal results contain center results for all corner nodes when you request results only at the center location.

How do I

Laminate Dynamics workflow

Create a dynamic simulation

Filter modes with small modal effective mass

Modify normal mode settings

Create a random event

Create a sine event

Solve the dynamic simulation

Learn more

Simcenter 3D Laminate Dynamics

Random Event

Sine Event

Look up more details

Simulation Navigator for Dynamic Simulation

Right-click commands for Dynamic Simulation

Laminate random results

Laminate Dynamics Details View subpanel (Simulation Navigator)

Supported elements

Damping definition

Modal truncation effects

Dynamic simulation output files

Confidence level in peak results computation

Supported failure theories

Running a Laminate Dynamics solution process from a command line

Quick links

Command reference

Pre/Post video examples

Bulk Entry Descriptions

Simcenter 3D tutorials

Browse Simcenter 3D help by product area

Laminate sine results, Simcenter 3D 2021.1 Series

© 2020 Siemens

window.mainLanguage="en_US"

window.delivId=""

window.projectId=""

MathJax.Hub.Config({ TeX: { extensions: ["autoload-all.js"] }, tex2jax: { displayMath: [ ] }, "SVG": { scale: 125 } });